This is a tube of genuine USA Made E6000 Glue, size and quantity of your choosing.

Suitable for use on metal, wood, fabric, glass, ceramic and more.

Only genuine USA Made E6000 has the production batch number printed on the tube.

Instructions for Safe Use Follow these step-by-step directions when using E6000:

1. Please read all directions and test small area before use.

2. Surface should be clean, dry, and free from dirt. For best results, lightly roughen surface before use.

3. Screw tip into top of tube cap. 

4. Apply directly to surfaces to be bonded or repaired. Allow 24 hours for curing—Maximum bond strength may not be reached for up to 72 hours.

5. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents.

Note: E6000 is not recommended for use on Styrofoam™, polystyrene, polyethylene or polypropylene plastics.

As with all glues E6000 should only be used in a well ventilated room